Remote Control - FUNAI F20LCTE-A Owner's Manual

- REMOTE CONTROL -

1
TV
INPUT
SELECT DISPLAY
2
1
3
4
7
4
MENU
MUTE
5
VOL
6
1. POWER button- Press to turn the TV ON and
OFF.
2. INPUT SELECT button- Press to select TV or
video input mode (VIDEO1 or VIDEO2).
[INSTALLING THE BATTERIES]
1
Remove the battery compartment
cover on the remote unit by sliding
it while slightly twisting.
3
Replace the cover.
BATTERY PRECAUTIONS
• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may
cause damage to the device.
• Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones.
• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury
from possible battery leakage.
• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
POWER
7
SLEEP
8
2 3
5 6
8 9
0
+100
CH RETURN
9
CH
10
3. Channel number button- Press to select
desired channels. Remember to press "0" before
a single digit channel.
+100 button- Press to select cable channels
higher than 99.
4. MENU button- Press to display the set up
menu on the TV screen.
5. MUTE button- Press to turn off the sound
(Volume level display changes LIGHT RED
from LIGHT BLUE). Press it again or press
n m
VOL or to restore sound.
n n m m
6. VOL / buttons- Press to ajust the volume
level.
m
Press VOL to determine the setting mode
from the set up menu.
Press to select or adjust a menu item.
7. DISPLAY button- Press to display the channel
number and TV sound mode on the screen. The
channel number will disappear by pressing it
again.
8. SLEEP button- Press to set the sleep timer and
start it.
9. CH RETURN button- Press to go back to the
previously viewed channel. Press it again to
return to the present channel.
10. CH ▼/▲ buttons- Press to select desired
channels.
Press to select or ajust a menu item.
2
Insert 2 "AA" penlight batteries
into battery compartment in the
direction as indicated by the
polarity (+ / -) markings.
4
Push the cover on its top side until
it clicks in order to fit the cover
completely to the compartment.
- 7 - EN