Manual Register - iLO CIWL2606 Owner's Manual

MANUAL REGISTER

You can register remainder of channels that were
not scanned by the Autoscan function due to the
bad reception status at the initial setting.
POWER
1 1 2 2
4 4 5 5
7 7 8 8
- - 0 0
SETUP SETUP
BACK
1
Display the setup screen.
• Press [SETUP].
The following setup screen is displayed.
2
Select "CHANNEL" and press [ENTER] to con-
firm.
• Using [ K / L ], select "Manual Register".
Channel Channel
Autoscan
Channel List
Manual Register
Antenna
• Press [ENTER].
INPUT
SLEEP
SELECT
3 3
6 6
AUDIO
9 9
STILL
SCREEN
MODE
ENTER ENTER
INFO
3
Select the channel you want to add.
• Using Channel number buttons, select your
desired channel.
Manual Register
Manual Register
For Analog channels,
select a channel to register
using number keys.
For Digital channels,
you must perform Autoscan function.
Ch Change
• Select "Register" with [ENTER].
4
To exit the setup, press [SETUP].
NOTES:
• If the setup is completed successfully, "Registered to the
channel list." is shown on the screen.
• If "Video1" is being used, set up will not be completed suc-
cessfully. "Unavailable" will be shown on screen.
11
Register
BACK
Back
15
EN