Replacing The Bluetooth Assembly - Dell XPS 8300 Service Manual

Replacing the Bluetooth Assembly

1 Follow the instructions in "Before You Begin" on page 13.
2 Slide the Bluetooth assembly cable through the slot on the front panel.
3 Align the Bluetooth assembly tab with the Bluetooth assembly slot in the
front panel.
4 Press in on the Bluetooth assembly tab, and push it towards the front panel
until it clicks into place.
5 Connect the Bluetooth assembly cable to the system board connector,
F_USB4 (see "System Board Components" on page 10).
6 Replace the front bezel (see "Replacing the Front Bezel" on page 29).
7 Replace the computer cover (see "Replacing the Computer Cover" on
page 18).
8 Connect your computer and devices to electrical outlets, and turn them on.
Bluetooth Assembly
71