Canon REBEL SL1 EOS 100D Instruction Manual page 38

Setting the Date, Time, and Zone
Set the date and time.
Press the <-4> <1_> keys to select
the number.
Press <SET> so <Q> is displayed.
Press the <A> <¥> keys to set the
number, then press <SET>. (Returns
to <_>.)
Set the daylight saving time.
Set it if necessary.
Press the <-4> <1_> keys to select
['_;_].
Press <SET> so <_> is displayed.
Press the <A> <¥> keys to select
[-:÷:-],then press <SET>.
When the daylight saving time is set
to [-:÷:-],the time set in step 4 will
advance by 1 hour. If ['_] is set, the
daylight saving time will be canceled
and the time will go back by 1 hour.
Exit the setting.
Press the <-4> <1_> keys to select
[OK], then press <SET>.
The date/time/zone and daylight
saving time will be set and the menu
will reappear.
If you store the camera without the battery or if the camera's battery
becomes exhausted, the date/time/zone may be reset. If this happens, set
the time zone and date/time again.
The date/time that was set will start from when you press <SET> in step 6.
After changing the time zone, check that the correct date/time has been
set.
38