Canon REBEL SL1 EOS 100D Instruction Manual page 110

® Using the Self-timer
Select [Drive/self-tmr].
Under the [1_11] tab, select [Drive/
self-tmr], then press <SET >.
[Drive/self-timer mode] will appear.
Select the self-timer.
Press the <<> <1_> keys to select
the self-timer, then press <SET >,
_®: lO-sec, self-timer
Theremote c ontroller canals0beused(p.309).
_2: 2-sec. self-timer (p.147)
_c: 10-see. s elf-timerpluscontinuous shots
Press the <A> <¥> keys to set
the number of multiple shots (2 to
10) to be taken with the self-timer.
Take the picture.
Lookthroughtheviewfinder, f ocusthe subject,
thenpress the shutterbuttoncompletely.
You can check the self-timer operation with
the self-timer lamp, beeper, and countdown
display (in seconds) on the LCD monitor.
Two seconds before the picture is
taken, the self-timer lamp will light up
and the beeper will sound faster.
4_ With <_c >, the interval between the multiple shots may be prolonged depending
on the shooting functions settings such as the image-recording quality or flash.
, If you do not look through the viewfinder when you press the shutter
button, attach the eyepiece cover (p.310). If stray light enters the
viewfinder when the picture is taken, it may throw off the exposure.
I_ After taking self-timer shots, playing back the image (p.89) to check
focus and exposure is recommended.
, When using the self-timer toshoot onlyyoursetf, use focus lock (p.61) on
an object at about the same distance as where you wiltstand.
To cancel the self-timer, either touch the LCD monitor or press <SET>.
110