Table of Contents
Advertisement
Turning
on the Power
if you turn on the power switch
and the dateltimelzone
setting
screen appears,
see page 29 to set the dateltimelzone.
<,1_>
<ON>
<OFF>
: The camera turns on. You can
shoot movies (p.87).
: The camera turns on. You can
shoot still photos.
: The camera is turned off and
does not operate. Set to this
position when not using the
camera.
_ Whenever you set the power switch to < ON > or < OFF >, sensor
cleaning will be executed automatically. (A small sound may be
heard.) During the sensor cleaning, the LCD monitor will display
< .*E3_ >.
_ You can still shoot during sensor cleaning by pressing the shutter
button halfway (p.35) to stop the sensor cleaning and take a picture.
_ If you repeatedly turn the power switch <ON>/<OFF > at a short
interval, the < tC_ > icon may not be displayed. This is normal and
not a malfunction.
_ To save battery power, the camera turns off automatically
after
approx. 30 seconds of non-operation.
To turn on the camera again,
just press the shutter button halfway (p.35).
_ You can set the auto power off time with [_'2: Auto power off].
If YOUSet the power Switch to < OFF="while an image is being recorded to
the card, [Record!rig,,.]
wi!! be disPlayed and the power W!!!turn off after the
card
finishes recording the image.
27
Advertisement
Table of Contents
