Processor Heat Sink - Dell Studio 1745 Service Manual

Hide thumbs Also See for Studio 1745:
Table of Contents

Advertisement

Back to Contents Page
  Processor Heat Sink
Dell Studio™ 1745/1747 Service Manual 
  Central Processor Heat Sink
  Graphic Processor Heat Sink
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
If you remove the processor heat sink from the computer when the heat sink is hot, do not touch the metal housing of the processor
heat sink.
 
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 
is not covered by your warranty.
 
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
 
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
 Central Processor Heat Sink
 
Removing the Central Processor Heat Sink
 
1. Follow the instructions in
Before You
 
2. Remove the battery (see
Removing the
 
3. Follow the instructions from
 
4. In sequential order (indicated on the processor heat sink), loosen the four captive screws that secure the processor heat sink to the system board.
 
5. Lift the central processor heat sink off the system board.
1
captive screws (4)
 
Replacing the Central Processor Heat Sink
NOTE:
This procedure assumes that you have already removed the central processor heat sink and are ready to replace it.
 
1. Follow the procedures in
Before You
 
2. Place the central processor heat sink on the system board.
 
3. Align the four captive screws on the central processor heat sink with the screw holes on the system board and tighten the screws in sequential order
(indicated on the processor heat sink).
 
Begin.
Battery).
step 2
to
step 20
in
Removing the System
2
central processor heat sink
Begin.
Removing the
Board.
Battery) before working inside the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Studio 1747Studio 1747

Table of Contents