Installing The Input/Output Panel - Dell OptiPlex 990 Desktop Service Manual

7. Remove the Input/Output panel.

Installing The Input/Output Panel

1. Insert the Input/Output panel into the slot on the chassis front.
2. Slide the Input/Output panel towards the left of the computer to secure to the
chassis.
3. Tighten the screw to secure the Input/Output panel to the chassis.
4. Connect the Input/Output panel or the FlyWire cable to the system board.
5. Install the front
6. Install the cover.
7. Follow the procedures in
48
bezel.
After Working Inside Your Computer.