Replacing The Display Panel - Dell 500 Service Manual

1 display panel
3 bottom flex-cable connector

Replacing the Display Panel

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
1. Follow the instructions in
2. Connect the top flex-cable connector to the display connector.
3. Connect the bottom flex-cable connector to the inverter connector.
4. Replace the eight screws (four on each side of the display panel) to secure the display brackets to the display panel.
5. Align the screw holes on the display bracket with the corresponding screw holes and guide pins on the top cover and
gently lower the display panel into place.
6. Replace the two screws that secure the display panel to the cover.
7. Replace the display bezel (see
8. Replace the display assembly (see
9. Replace the keyboard (see
10. Replace the center control cover (see
Back to Contents Page
2 top flex-cable connector
Before You Begin.
Replacing the Display
Replacing the Display
Replacing the Keyboard).
Replacing the Center Control
Bezel).
Assembly).
Cover).