P2 Card Insertion And Removal - Panasonic AG-CPDIOCRUP Operating Instructions Manual

P2 card insertion and removal

Never open the cover or remove the P2 card while the P2 card is being
accessed. Otherwise the data on the card may be lost or damaged, and the P2
card slot may become inoperative.
Inserting a P2 card
(1) Open the cover.
Insert the key into the lock and
turn it clockwise by 60 degrees.
Notes:
• To prevent damage, do not exert
undue force on the open cover.
Do not push in this
direction.
• Do not try to turn the key further
than the stop position, and do not
move it unnecessarily, to prevent
damage to the key and lock.
14
(2) Insert a P2 card into the P2
card slot and push it in until
the EJECT button pops out.
Insert the card
with the P2 logo
facing up.
(3) Fold the protruding EJECT
button to the right.
Do not touch to avoid
the risk of injury.
Note:
Make sure that the EJECT button
has been properly positioned as
illustrated above before closing the
cover. Otherwise the EJECT button
will be damaged.
EJECT button