Page 1
URC 4 (US Edition) Remote Control Guide ®...
Page 2
The material in this document is for information only and is subject to change without notice. While reasonable e orts have been made in the preparation of this document to assure its accuracy, Entone, Inc. assumes no liability resulting from the use of the information contained herein.
TABLE OF CONTENTS OVERVIEW Remote Control Controlling Your TV and other A/V Devices Program Remote to Control Your TV or AUX Device Toggle Power Key Punch - through Functionality Toggle Volume Key Punch - through Functionality Toggle Channel Up/Down Keys for TV/AUX Auto Search Procedures POWERING UP Setting up Remote Control...
Page 5
Switches STB to power on or standby mode TV: Select to control TV DEVICE CONTROL (if programmed) STB: This button is pre-programmed to control the Entone device AUX: Select to control another device (if programmed) TRANSPORT KEYS Controls video program for LIVE TV / DVR / VOD REPLAY: Goes back approx.
Controlling Your TV and other A/V Devices The Universal Remote Control (URC) can be used to control TVs and other A/V devices such as DVD players. The URC uses InfraRed (IR) light signals to control other devices. IR signals travel only short distances (40 feet or less), and cannot go through walls or other solid objects.
Program Remote to Control Your TV or AUX Device Locate the device code for your desired device in the device code table provided in the Appendix starting on page 9. If you cannot nd the device code for your device or it does not work after trying the listed device codes for your device brand, then you can try the auto search on page 7.
Toggle Volume Key Punch-through Functionality By default, “Vol +/-” and “MUTE” keys are sent to STB only when the remote control is in STB mode. Punch-through function for those keys is enabled at the same time when programming the device code for TV or AUX.
Auto Search Procedures If your device does not respond to the remote control after trying all device codes listed for you brand, or if your brand is not listed, try searching for your device code as follows: 1. Turn on your TV or your A/V device. 2.
POWERING UP SETTING UP REMOTE CONTROL Locate the two AA batteries and remote control in the acces- sory box To open the battery cover, press down on the battery cover latch and slide it o Insert the AA batteries, matching the "+" and "-" marks on the batteries to the "+"...
APPENDIX DEVICE CODES Your Universal Remote Control (URC) can control many brands and models of television, VCR’s , DVD’s and other types of audio-visual equipment. The following pages list device codes for many categories and brands of equipment. Many brands list more than one code, and you may need to test several codes to nd the best match for your equipment.
Page 20
All information contained in this document is subject to change without notice. Information contained in this document is provided on an as is basis. In no event will Entone be liable for damages arising directly or indirectly from any use of the information contained in this document. Subject to change...