Page 2
The material in this document is for information only and is subject to change without notice. While rea- sonable efforts have been made in the preparation of this document to assure its accuracy, Entone, Inc. assumes no liability resulting from the use of the information contained herein. Entone, Inc. reserves the right to make changes in the product design without reservation and without notification to its users.
Page 3
OVERVIEW REMOTE CONTROL Button(s) Description SET UP Set up remote for TV STB POWER Switches STB to power on or standy mode INFO Displays on-screen information about the current TV / VOC / DVR program NAVIGATION ARROW KEYS: Navigates up, down, left and right within the on-screen guide or menus OK: Executes the currently selected menu option EXIT...
Page 4
CONTROLLING YOUR TV PROGRAM REMOTE TO CONTROL YOUR TV The Stylus remote control can be used to control TV as well. It You can program the Stylus to control a TV by uses InfraRed (IR) light signals to control other devices. IR sig- nals travel only short distances (10 meters or less), and cannot 1.
Page 5
POWERING UP SETTING UP REMOTE CONTROL AUTO SEARCH PROCEDURES If your TV does not respond to the remote control after trying 1. Locate the two AAA batteries and remote control in the accessory box all device codes listed for you brand, or if your brand is not listed, try searching for your device code as follows: 2.
TROUBLESHOOTING DEVICE CODES Problem Solution Your Stylus Remote Control can control many brands and models of television. The following pages list device codes for The red LED does not blink when Replace the batteries with two (2) new a key is pressed AAA batteries many brands of TV.
Page 11
All information contained in this document is subject to change without notice. Information contained in this document is provided on an as is basis. In no event will Entone be liable for damages arising directly or indirectly from any...