Display Assembly Bezel - Dell Latitude CPi A Service Manual

!    " 


4.5-mm screws (4)

display assembly bezel

5-mm screws (2)
1. Use a scribe to carefully pry the screw covers out of the six screw holes in
the bezel.
2. Remove the six screws from the bezel.
The four upper screws are 4.5-mm screws, while the two lower screws are
5-mm in length.
3. Separate the bezel from the display-assembly top cover.
The bezel is secured by snaps around all four of its edges. Insert your
fingertips between the bezel and the LCD panel, and lift upward on the bezel
to release the hidden snaps. Avoid pressing on the surface of the LCD panel.
!   #
NOTE: On a 13.3-inch display, you must remove the LCD panel before you can
remove the display assembly latch.
1. Remove the display assembly bezel.
2. Remove the display assembly latch by unsnapping the latch and captive
spring from the inside of the display assembly top-cover assembly.
screw covers (6)
display-assembly
top cover
Dell Latitude CPi A Service Manual 23