Remote Valet; Remote Start - Clifford Ultramax XL-4500 Owner's Manual

Table of Contents

The status LED will light steadily to indicate that you have

entered Valet

Mode and will turn off when you have exited Valet

Mode.

Remote Valet

You can also activate Valet

1. Open any vehicle door.

2. Press

3. Press

4. Press

again.

The status LED will light solid if you are entering Valet

will turn off if you are exiting Valet

This feature allows you to remotely start and run your vehicle for

a programmable period of time. This makes it possible to warm up

the engine, as well as adjust the interior temperature of the vehi-

cle with the climate control system. If interior heating or cooling

is desired, the climate controls must be preset, and the fan blower

must be set to the desired level prior to remote starting the vehicle.

IMPORTANT! (1) Never remote start your vehicle when the keys are in the

ignition, except when performing Valet

the vehicle if it is not in either PARK or NEUTRAL.

Pressing

and

sequence. The parking lights will flash to warn that the motor is

about to start. It is important to release the transmitter buttons

2000 Directed Electronics, Inc.

Mode using the remote transmitter:

Mode.

Take-Over, and (2) Never start

at the same time will begin the remote start

Mode and

Table of Contents