Quick Reference Guide - Clifford Ultramax XL3500 Owner's Manual

QUICK REFERENCE GUIDE:

To lock/arm using your remote
s To lock/arm the system press
connected). The LED will begin to flash. If installed, the optional
®
Failsafe Starter Kill will prevent the vehicle's starter from cranking if it
has been installed. The vehicle's horn (if connected) will honk and the
parking lights will flash once to confirm arming of the system.
To unlock/disarm using your remote
s To unlock/disarm the system press
unlock (if connected). If installed, the optional Failsafe
be deactivated and the vehicle's horn (if connected) will honk twice and
the parking lights will flash twice.
Disabling the optional Failsafe
s Turn on the ignition. Press and release the Valet
onds. The LED will stop flashing and the vehicle should start. Be sure to
check with the installer for the location of the Valet
To remote start the vehicle
s Press
and
nected) and the vehicle will start and run for the programmed amount
of time.
To enter or exit Valet
s Turn the ignition to the "ON" position. Turn the ignition back off. Press
and release the Valet
light steadily if you have entered Valet
repeat the steps above. The LED will turn off when exiting Valet
To activate Panic Mode
s Press and hold
To disable the remote start system
s To disable the remote start, move the shutdown toggle switch to the OFF
position.
Location of Shutdown Switch______________________________
2000 Directed Electronics, Inc.
©
for one second. The doors will lock (if
for one second. The doors will
®
Starter Kill without a transmitter
simultaneously. The parking lights will turn on (if con-
®
Mode
®
switch within 10 seconds. The status LED will
®
Mode. To exit Valet
for 1.5 seconds.
®
Starter Kill will
®
switch within 10 sec-
®
switch.
®
Mode,
®
Mode.
21