Dell Latitude C510 Service Manual page 66

System Board: Dell Latitude C610/C510 Service Manual
b. Replace the six M2.5 x 5-mm screws, starting on the right side of the bottom case (see
"System Board Screw
c. Replace the fan guard, inserting the tab into the bottom case, and replace the three
M2.5 x 5-mm screws (see
opposite the tab first makes it easier to insert and replace the other two screws.
4. Replace the modem, the speaker assemblies, and the microprocessor thermal cooling assembly
that you removed from the old system board.
NOTE: Be sure to route cables so that they will not be crimped or pinched when the complete
assembly is put back together.
5. Replace the palm rest, the keyboard, the display assembly, and the hard drive.
6. Replace the module bay devices and any PC Cards or plastic blanks in the PC Card slot.
7. Insert the floppy disk or CD that accompanied the replacement system board into the
appropriate drive, and turn on the computer. Follow the instructions on the screen.
NOTE: After replacing the system board, be sure to enter the computer service tag sequence
into the BIOS of the replacement system board.
Back to Contents Page
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...10/C510%20C610%20Service%20Manual/sysboard.htm (4 of 4)6/21/2004 1:25:43 AM
Removal").
"System Board Screw Removal"). Replacing the screw