Microprocessor Module; Removing The Microprocessor Module - Dell Latitude C510 Service Manual

Hide thumbs Also See for Latitude C510:

Table of Contents

Microprocessor Module: Dell Latitude C610/C510 Service Manual

Back to Contents Page

Microprocessor Module

Dell™ Latitude™ C610/C510 Service Manual

Replacing the Microprocessor Module

Removing the Microprocessor Module

NOTICE:

Disconnect the computer and any attached devices from electrical outlets, and

remove any installed batteries.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by touching an

unpainted metal surface on the computer.

NOTICE:

Read

procedure.

Microprocessor Module Removal

NOTICE:

Do not touch the processor die. Press and hold the microprocessor down on the

substrate on which the die is mounted while turning the cam screw to prevent intermittent

contact between the cam screw and microprocessor.

NOTICE:

To avoid damage to the microprocessor, hold the screwdriver so that it is

perpendicular to the microprocessor when turning the cam screw.

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...%20C610/C510%20C610%20Service%20Manual/cpu.htm (1 of 4)6/21/2004 1:25:39 AM

"Preparing to Work Inside the

Computer" before performing the following

Table of Contents

Latitude c610