Operations; Basic Operations - Clarion DXZ676USB Owner's Manual

Cd/usb/mp3/wma/aac receiver with cenet control
Hide thumbs Also See for DXZ676USB:
Table of Contents

Advertisement

6. OPERATIONS

Note:
• Be sure to read this chapter referring to the front diagrams of chapter "CONTROLS" on page ii (unfold).

Basic Operations

CAUTION
Be sure to lower the volume before
switching off the unit power or the ignition
key. The unit remembers its last volume
setting. If you switch the power off with the
volume up, when you switch the power back
on, the sudden loud volume may hurt your
hearing and damage the unit.
Turning on/off the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car's
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [SRC] button.
The mode that was previous active is
displayed.
2. Press and hold the [SRC] button for 1
second or longer to turn off the power for the
unit.
Note:
• The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, "SYSTEM CHECK" appears in the
display, then the unit returns to the clock display
mode. The system check starts within the unit.
When the system check is complete, press the
[SRC] button again.
Selecting a mode
1. Press the [SRC] button to change the
operation mode.
2. Each time you press the [SRC] button, the
operation mode changes in the following
order:
Radio
CD/MP3/WMA/AAC
(iPod BB)
(CD changer)
(TV)
AUX
Radio...
External equipment not connected with
CeNET is not displayed.
10
DXZ676USB
Adjusting the volume
1. Push the [VOL] button upward or downward
Switching the display
Press and hold the [TITLE] button for 1 second
or longer to select the desired display.
1. Each time you press and hold the [TITLE]
1. Each time you press the [TITLE] button, the
USB
(DVD changer)
to adjust the volume.
The volume level is from 0 (minimum) to 33
(maximum).
When the power is turned on
button for 1 second or longer, the display
switches in the following order:
Action display
Title display
display
Action display...
When the power is turned off
clock time appears or disappears in the
display.
Clock time

Advertisement

Table of Contents
loading

Table of Contents