Clarion DXZ676USB Owner's Manual page 23

Operations Common to Each Mode
3-4 Press the [MENU] button to select a
character type. Each time you press the
[MENU] button, the character type changes
in the following order:
Capital letters Small letters
Symbols Umlaut
3-5. Push the [P.CH] button upward or
downward to select the desired character.
3-6. Repeat step 3-3 to 3-5 to enter up to 30
characters for message.
3-7. Press and hold the [
seconds or longer to store the message in
memory and cancel the input message
mode.
Press and hold the [MENU] button for 1
second or longer to cancel the input
message. Then press and hold the
[ ]
button for 2 seconds or longer to
store the message and the message return
to the default setting.
Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA/AAC
title.
The factory default setting is "ON".
2-1. Select "AUTO SCROLL".
3-1. Push the [P.CH] button upward or
downward to select "ON" or "OFF".
• ON:
To scroll automatically.
• OFF:
To scroll just 1 time.
Setting the speed of the title scroll
This function allows you to adjust the speed of
the title scroll.
The factory default setting is "3".
2-1. Select "SCROLL SPEED".
3-1. Push the [P.CH] button upward or
downward to select from "1" to "6".
Setting the dimmer control
You can set the dimmer control "HIGH", "MID",
"LOW" or "OFF".
The factory default setting is "MID".
2-1. Select "DIMMER".
3-1. Push the [P.CH] button upward or
downward to select "HIGH", "MID", "LOW"
or "OFF".
Numbers/
Capital letters...
] button for 2
Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
The factory default setting is "OFF".
2-1. Select "BLINK LED".
3-1. Push the [P.CH] button upward or
downward to select "ON" or "OFF".
Setting the external amplifier
The factory default setting is "OFF".
2-1. Select "AMP CANCEL".
3-1. Push the [P.CH] button upward or
downward to select "ON" or "OFF".
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
Setting the car speaker output for the
cellular phone
When the AUX input cable is used to connect a
AUX BLUETOOTH BB (BLT370) (sold
separately)
The factory default setting is "L".
To output the telephone calls, set the cellular
phone interrupt to ON.
2-1. Select "TEL-SPEAKER".
3-1. Push the [P.CH] button upward or
downward to select "R" or "L".
• R:
Telephone calls can be heard on the front
right speaker connected to this unit.
• L:
Telephone calls can be heard on the front
left speaker connected to this unit.
21
DXZ676USB