Installing The Microprocessor Module - Dell Inspiron 510M Service Manual

Hide thumbs Also See for Inspiron 510M:

Table of Contents

Microprocessor Module: Dell Inspiron 510m Service Manual

1 pin-1 corner

2 ZIF socket

NOTE:

The ZIF-socket cam screw secures the microprocessor to the system board. Take note

of the arrow on the ZIF- socket cam screw.

5. Lift out the microprocessor module.

Installing the Microprocessor Module

NOTICE:

Ensure that the cam lock is in the fully open position before seating the

microprocessor module. Seating the microprocessor module properly in the ZIF socket does not

require force.

NOTICE:

A microprocessor module that is not properly seated can result in an intermittent

connection or permanent damage to the microprocessor and ZIF socket.

1. Align the pin-1 corner of the microprocessor module with the pin-1 corner of the ZIF socket,

and insert the microprocessor module.

NOTE:

The pin-1 corner of the microprocessor module has a triangle that aligns with the

triangle on the pin-1 corner of the ZIF socket.

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...S_checked%20ok/Inspiron/510M/510M%20SM/cpu.htm (2 of 3)6/21/2004 12:34:54 AM

Table of Contents