Display Panel - Dell Inspiron 510M Service Manual

Display Assembly and Display Latch: Dell Inspiron 510m Service Manual

Display Panel

14.1-Inch Display Panel
CAUTION: Before performing the following procedures, read the safety instructions
in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
1. Follow the instructions in
2. Remove the keyboard.
3. Remove the display
4. Remove the eight M2 x 5-mm screws from each side of the display- panel adapter rails.
5. Lift the display panel, and rotate the display panel out of the display cover.
6. Remove the four M2 x 3-mm screws from each side of the display panel to remove the adapter
rails.
When reinstalling the adapter rails to the replacement display panel, orient the rails so that the
"This side up" markings are facing you, and then reattach the rails with the M2 x 3-mm four
screws. (The "This side down" markings on the rails should be visible from the backside of the
display panel.)
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...ecked%20ok/Inspiron/510M/510M%20SM/display.htm (7 of 12)6/21/2004 12:34:56 AM
"Preparing to Work Inside the
bezel.
Computer."