Table of Contents
Advertisement
Farmnavigator
This Option is used to work in fields where tram lines
already have been made (e.g. vineyards). In this mode
Farmnavigator does not guide you but it shows the worked
area and allows using the spray boom virtual control.
3.5.4 Round and Round
Setting the round and round guiding lines you can create
concentric lines starting from the field's perimeter
up to the centre. Press A, then start driving along the
perimeter and press B when you have completed it: the
software will draw concentric lines up to the centre of
the field.
3.6 Assisted driving
After the Guiding lines have been set, the navigation aid
is displayed above the Map. The navigation aid shows
with two directional arrows in which direction the
steering has to be corrected to drive on the calculated
18 - AvMap
Advertisement
Table of Contents
