Table of Contents
Advertisement
Farmnavigator
Press Field view. Press the Start Work button in the
bottom bar to start recording the data (worked area,
speed, perimeter and area) that will be saved in the
Fields Database.
To stop the recording of the worked area click stop in the
down left corner. You can start working on this field again
at any time with a click on start or when you reopen the
field in the fields' database.
3.3 Measuring Perimeter and Area
The first operation you can do is to measure the field
by driving along the perimeter of the field. Drive some
meters at first. Then click the measure button (with
the ruler icon). The boundary now is recorded from the
starting point (red arrow). Now drive around the field
until you have reached the starting point, and then click
the measure button again. The Field limits are now saved
and the area is calculated. This information is stored in
14 - AvMap
Advertisement
Table of Contents
