Door Lock/Unlock - Avital Avistart 3001 Installation Manual

Remote engine starter system

Hide thumbs Also See for Avistart 3001:

Table of Contents

Glow Plug Light Monitoring

The glow plug light (+) input wire will monitor the glow plug light in the

dashboard. When a remote start is attempted, the ignition will turn on and

when the glow plug light turns "OFF" the engine will start

1 . Locate the glow plug light wire that will show (+) 12 volts while the

ignition key is on and the glow plug light wire is illuminated.

2 . Connect the AviStart ORANGE/BLACK wire to the vehicle glow plug

might wire.

NOTE: Do not use both "pre-ignition" and "glow plug light monitoring" at

the same time (use one or the other).

Door Lock/Unlock

CAU TION : Be sure to ver ify the type of door lock sys tem you are

work ing with. Some types of door lock sys tems re quire op tional

re lays, for ex am ple, re verse po lar ity type door locks. Refer to the

diagrams on pages 12 - 14.

AviStart 3001 Installation Manual, Revision B 100199

Posi tive Trig ger Door Locks

Table of Contents