Cisco Wireless LAN Controller 4100 Product Manual page 14

Connecting the Service Port Interfaces
For a front-panel Cisco Wireless Control System, Web User Interface, or CLI console connection,
•
use CAT-5, CAT-5e, CAT-6, or CAT-7 ethernet cables to connect the Cisco Wireless Control System
(Cisco WCS) Server, Web User Interface, or another CLI console to the dedicated front-panel
Service port.
Figure 6
For a front-panel Cisco Wireless Control System, Web User Interface, or CLI console connection,
•
use CAT-5, CAT-5e, CAT-6, or CAT-7 ethernet cables to connect the management network to the
front-panel service port.
Use the appropriate cables to connect the Cisco Wireless Control System, Web User Interface, or
CLI console to the optional management network.
Figure 7
Cisco 4100 Series Wireless LAN Controllers - Installation and Configuration Guide
14
CLI Console Connection to a Controller through a Null-Modem Serial Cable
CLI Console Connection to Controller through a Management Network
Optional management
network
Installation and Configuration
78-17155-01