Replacing The Battery - Fujitsu LifeBook B6230 notebook User Manual

Replacing the Battery

Your LifeBook notebook comes with one battery pack, but it's a good idea to purchase a second one. By
keeping a spare battery fully charged, you can immediately swap with one that is not charged. If the system
is not plugged into a power adapter, the battery can only be replaced by cold-swapping; doing otherwise
could result in loss of data. (Cold swapping means swapping batteries when the system has been powered
down.)
Cold-swapping Batteries
To cold-swap batteries in your battery bay follow these easy steps:
1
Have a charged battery ready to install.
2
Shut down your notebook and disconnect the AC adapter.
3
Push the battery bay release latches inward, then lift the
front of the battery away from the battery bay and remove
it from the bay.
4
Position the new battery in the bay and carefully lay it into
the tray. Press it down so that the latches click into place
to secure the battery.
5
Turn the power on.
I L
F THE ITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED
NOTEBOOK OR CHARGE YOUR BATTERY
.
66 - Lithium ion Battery
(Figure 23)
Battery Bay Release Latches
Figure 23. Removing a battery
,
YOU MAY NOT BE ABLE TO USE YOUR
Battery