GMC 2012 Canyon Owner's Manual page 283

4. Push the new bulb into the
socket until it clicks.
5. Insert the bulb socket into the
lamp assembly and turn it
clockwise to secure.
6. Reinstall the lamp assembly and
tighten the screws.
To replace one of these bulbs:
1. Reach under the rear bumper for
the bulb socket.
2. Turn the bulb socket
counterclockwise and pull the
bulb socket out of the connector.
3. Pull the old bulb straight out
from the bulb socket.
4. Push the new bulb straight in
until it clicks to secure it.
5. Reach under the rear bumper to
reinstall the bulb socket into the
connector.
6. Turn the bulb socket clockwise
to secure it to the connector.
Cargo Lamp
and Center
High Mounted
Stoplamp (CHMSL)
License Plate Bulb
Headlamps
High-beam
Low-beam/
Daytime
Running
Lamp (DRL)
Parking/Front Turn
Signal
Parking Lamp
(Inboard)
Stoplamp, Rear
Turn Signal,
Taillamp, and
Back up Lamp
For replacement bulbs not listed
here, contact your dealer.
912LL
W5W LL
9005
9006
3757KA
3157A
3057