Table of Contents
Advertisement
To turn the RVC system on or off:
1. Shift into P (Park).
2. Press MENU to enter the
configure menu options. Turn
the Multifunction knob until the
Display feature is highlighted
and press the Multifunction
knob. Or press the Display
screen button
3. Select the Rear Camera Options
screen button. The Rear Camera
Options screen displays.
4. Select the Video screen button.
When the Video screen button
is highlighted the RVC
system is on.
The delay after shifting out of
R (Reverse) is approximately
10 seconds. The delay can be
canceled by performing one of
the following:
Pressing a hard key on the
navigation system.
Shifting into P (Park).
Reaching a vehicle speed of
8 km/h (5 mph).
To adjust the brightness and
contrast of the screen, press the
MENU button while the RVC image
is on the display. Any adjustments
made will only affect the RVC
screen.
Touch the + (plus)
or
(minus) screen buttons to
increase or decrease the brightness
of the screen.
Touch the + (plus) or
(minus) screen buttons to increase
or decrease the contrast of the
screen.
Advertisement
Table of Contents
