Table of Contents
Advertisement
7. Place the bottom edge of the
jack (A) on the wheel blocks (B),
separating them so that the jack
is balanced securely.
8. Attach the jack handle,
extension, and wheel wrench to
the jack and place it (with the
wheel blocks) under the vehicle
towards the front of the rear
bumper. Position the center lift
point of the jack under the
wheel.
9. Turn the wheel wrench
clockwise to raise the jack until it
lifts the tire.
10. Continue raising the jack until
the tire stops moving upward
and is held firmly in place.
11. Remove the jack handle and
insert the hoist end of the
extension through the hole in
the rear bumper.
Turn the wheel wrench
counterclockwise one turn
or until the wheel retainer
assembly is disengaged.
12. Reinsert the jack handle into
the jack. Lower the jack by
turning the wheel wrench
counterclockwise. Keep
lowering the jack until the
spare tire slides off the jack
or is hanging by the cable.
Advertisement
Table of Contents
