Table of Contents
Advertisement
If the spare tire does not lower to
the ground, the secondary latch
is engaged causing the tire not
to lower. See
4. Tilt the retainer when the tire has
been lowered, and slide it up the
cable so it can be pulled up
through the wheel opening.
5. Put the spare tire near the
flat tire.
Use the following pictures and
instructions to remove the flat tire
.
and raise the vehicle.
The tools you will be using include
the jack (A), the wheel blocks (B),
the extension tool (C), the jack
handle extensions (D), and the
wheel wrench (E).
1. Do a safety check before
proceeding. See
information.
2. Remove the center cap by
placing the chisel end of the
wheel wrench (E) into one of the
slots on the wheel and gently
prying the cap out.
for more
Advertisement
Table of Contents
