Picture Menu - Picture Settings - Fujitsu Siemens Computers MYRICA V40-1 Owner's Manual

MYRICA V40-1

PICTURE menu - picture settings

► Press the MENU button to open the OSD menu.
► Mark the Picture menu item with the
► Press the MENU button to activate the menu item.
The buttons available to you for setting the options are shown in the menu footer.
Mode
Temperature
Video NR
Screen form
24 - English
With this function you set the picture mode.
The contrast, brightness, colour and focus of the picture are set to optimum
values depending on the picture mode.
Possible values: Standard, Vivid, Mild, User.
After the User option is selected, a further submenu appears:
Contrast This function increases or decreases the contrast.
Brightness With this function you set the picture brighter or darker.
Color With this function you set the colour saturation.
With this function you set the sharpness of the picture.
Sharpness
Recall With this function you reset all parameters of this menu
to the factory settings.
With this button you set the colour temperature.
Possible values: Cool2, Cool1, Normal, Warm1, Warm2.
With this function you switch the picture correction (Noise Reduction) on or
off.
Possible values: On, Off
With this function you set the picture format.
Possible values: 16:9, PANORAMA, ZOOM1, ZOOM2, 4:3.
/ buttons.
A26361-K1070-Z120-1-M119, edition 1