Setting Language Of The Osd Menu; Carrying Out Programme Search - Fujitsu Siemens Computers MYRICA V40-1 Owner's Manual

MYRICA V40-1

Setting language of the OSD menu

After switching on the device, set the language of the OSD (On Screen Display) menu according to
your needs. According to the country variant, either German or English is preset as the default
setting. If you want to use a different language, change this setting with the OSD menu.
► Switch the LCD TV on with the ON/OFF switch.
► Press the POWER button.
► Press the MENU button to open the OSD menu.
► Choose the Setup menu item using the
► Press the MENU button to activate the menu item.
► Choose the Advanced menu item using the
► Press the MENU button to activate the menu item.
► Choose the Language menu item using the
► Press the MENU button to activate the menu item.
► Select the language to be shown in the OSD menu with the buttons
► Press the Menu button. The OSD menu will be changed over to the selected language.

Carrying out programme search

A programme search must be carried out to put the LCD TV into operation. Use the supplied remote
control.
► Switch the LCD TV on with the ON/OFF switch.
► Press the POWER button.
First the signal source must be set to the TV mode.
► Press the SOURCE button.
► Choose the TV option using the
► Press the MENU button to activate the menu item.
Then you automatically start the programme search.
► Press the MENU button to open the OSD menu.
► Choose the TV menu item using the
► Press the MENU button to activate the menu item.
14 - English
button.
button.
button.
button.
button.
A26361-K1070-Z120-1-M119, edition 1
/ .