Deleting Program; Selecting Signal Source; Changing Programme - Fujitsu Siemens Computers MYRICA V40-1 Owner's Manual

MYRICA V40-1

Deleting program

► Select the programme you want to delete with the buttons
► Press the ERASE button (red). The selected programme is deleted from the programme list.

Selecting signal source

Selecting signal source for main display
► Press the SOURCE button in the upper section of the remote control.
► Choose the signal source you require using the
► Press the MENU button to activate your selection.
Selecting signal source for PIP display
► Press the ON/OFF button to activate the PIP mode.
► Press the SOURCE button in the lower section of the remote control (in the PIP field).
► Choose the signal source you require using the
► Press the MENU button to activate your selection.

Changing programme

► Press the button to change to the next programme in the programme list.
► Press the button to change to the previous programme in the programme list.
18 - English
/ .
button.
button.
A26361-K1070-Z120-1-M119, edition 1