Table of Contents
Advertisement
Address Book editing (Special Settings)
See page 41 for steps 1 and 2.
3
Select an entry you would like to
modify or delete and press ENTER.
(In this example, May Garden Restaurant
is chosen.)
4
Select Sp. and press ENTER.
5
The Special Setting screen appears.
Select the desired item and press
ENTER.
L Setting the point to avoid (Point to Avoid)
• This setting allows the system to permanently avoid a specific point. Routes are set to avoid
roads between crossroads surrounding that point.
• Five locations can be set as Points to Avoid. These are assigned X0, X1, X2, X3, or X4 when
they are displayed in the Address Book.
L Setting the point to beep (Point to Beep)
• You can set the system to beep when you are driving and approaching a point requiring par-
ticular care (such as a point where accidents occur frequently).
• Up to ten locations can be set including the beep direction points (from B0 to B9).
L Setting the travel direction to beep (Point to Beep (Directional))
• For details on how to set the direction, see Page 68 Direction adjustment.
• You can set the system to beep, not only upon approach to a point but also from a specific
direction of travel. For example, you can set the system to beep as you near Las Vegas when
travelling from New York to Los Angeles.
• Up to ten locations can be set as directional beep points and beep points (from B0 to B9).
L Not used (No Special Setting)
• Use to cancel selected avoid points/beep points/directional beep points.
44
ENTER
ENTER
ENTER
Sp.
ENTER
ENTER
ENTER
Advertisement
Table of Contents
