Bosch SHE45C Use & Care Manual page 6

Top and Bottom Rack Flip Tines (_model dependant)
Flip Tines fold down to ease the loading of racks in some
instances. Grasp the tines, release from notch, and fold the
tines downward. When the rack is loaded, push it into the
dishwasher all the way.
Released from notch
To lower the top rack:
o
o
Pull the top rack out of the dishwasher until it stops.
Press the Rackmatic Automatic Height- Adjustable Top
Rack handles inward atthe same time as shown in Figure
7 and let the rack drop.
FIGURE 4- FLIPTINE DOWN
FIGURE 5 - FLIP TINE UP
FIGURE 7
MANUAL HEIGHT ADJUSTMENT(*See M in the Rack Acces-
sories table*)
Remove the empty upper rack by pulling it out of the diswasher
to the point that it can be lifted upward, as shown in Figure 8.
Pull the rack outward and up until the rollers are completely
free of the roller guides. Re-insert the rack with the other set of
rollers on the roller guides, as shown in Figure 9.
Top Rack Height Adjustment
RACKMATIC (*See RM in the Rack Accessories Table*)
The top rack can be raised or lowered to accomodate large
items in either racks.
To raise the top rack:
• Pull the empty top rack out of the dishwasher until it stops.
Grasp the top of the rack above the Automatic Height-
Adjustable Top Rack handles and pull it upward as shown
in Figure 6 until the handles lock the rack into position
(you do not need to press the handles in order to raise the
rack).
FIGURE6
FIGURE 8
FIGURE 9
NOTE: Before you push the top rack into the dishwasher,
ensure that the rack height is the same on both sides.
Otherwise, the dishwasher door will not shut and the top
rack spray arm will not connect to the water circuit.
6