Bosch SHE45C Use & Care Manual page 11

Quick Wash: Cleans lightly soiled dishes and reduces overall
wash time. Use this cycle to clean glasses and desert dishes that
may need to be re-used at the same event.
Rinse& Hold: Allows you to rinse the food soil offofa partial
load and hold them in the dishwasher until there is a full load.
WASH CYCLE OPTIONS & DISHWASHER FEATURES
X X X
X X X X X
X X X X X X
X X X
X X X X X X
x
X X X
X X X X X X X
X X X X X X X
X X X X X X X X
X X X X X
X X X X X X
x
x
X X X X X X
x
X X X
X X X X X X
X X X X X X X X
X X X X X X X
Delay Start
This option allows you to delay the start time of your dishwasher.
To activate:
o Turn the dishwasher on.
Select the desired wash cycle.
Press and hold the Delay Start button. Release when the
desired delay time is shown in the display window.
DISHWASHER FEATURES
Extra Dry Heat
With this option you can raise the temperature of the rinse water
and increasethe drying time which will result in improved drying.
NOTE: The unit must be powered OFF before activating.
To activate:
Press and hold the left "Cancel/Reset" button, then press
and hold the On/Off button.
When the LED display shows a"O"or a"l "release both but-
tons.
To enable the Additional Drying Heat, press the left"Cancel
/Reset" button until the LED display shows a "1 ".
To disable the Additional Drying Heat, press the left
"Cancel/Reset" button until the LED display shows a "00".
Press the On/Off button to save the setting
OPTIDRY
TM
This feature senses when the unit is low on rinse agent and
automatically increases the drying time. For best performance,
always use a liquid rinse agent even if your detergent contains
a drying additive.
Child Control Lock
The Child Control Lock feature allows you to disable the
dishwasher control panel to prevent accidental program
changes.
To activate:
Press and hold the button labeled"Child Lock"for 4 seconds
and the "Child Lock" indicator light will illuminate.
To disable :
Pressand hold the "Child Lock" button for 4 seconds
CYCLE OPTIONS
Options can be used along with wash cycle to customize load
for personalized results:
1. Select wash cycle
2. Select option
3. Start dishwasher
Half Load
In the Power Scrub Plus, Regular and Auto Wash cycles you
can reduce the energy and water consumption when washing
small, lightly soiled loads that fill approximately half of the
dishwasher's capacity. To activate, select the Half Load button.
ECOACTION TM
This option savesenergy by reducing the water temperature
Cycle Completion Signal
This Cycle Completion Signal is a tone that sounds to alert you
when your dishwasher finishes washing and drying your dishes.
You can either disable the tone or set the volume.
NOTE: The unit must be powered OFF before activating.
To activate:
Press and hold the right "Cancel Reset" button then press
and hold the On/Off button.
When the light on the "Cancel Reset" button you are
pressing illuminates and the tone begins to sound, release
both buttons.
Press the right-most"Cancel Reset" button until the tone is
either at the desired volume or is silent.
11