Bosch SHE45C Use & Care Manual page 16

WASH CYCLE INFORMATION
NOTE: To save energy, this dishwasher has a "Smart Control" that automatically adjust the cycle based on soil loads and
incoming water temperature. The "Smart Control" makes decisions that can cause the cycle time and water usage to adjust
intermittently. The cyde times listed in the Use and Care manual are based on normal soil loads and 120°F incoming water
and will vary based on your actual conditions.
See the Cycles and Options Charts to determine the cycles available for your specific model.
NOTE: On select models, the Half Load feature will reduce the water consumption by approximately 30 percent in the Power
Scrub Plus, Regular, and Auto Wash cycles.
*** SHE58C, SHE68M, SHV68M, SHX55M, SHX68M
Auto
Plus
Regular
Wash
Auto
Delicate
Auto
105-125
4.5
7.0
17
26.6
130°-150°F
156°F
Quick
Wash
Rinse &
Hold
Cycle Time 120 - 135 119 80-100 30 6
(minutes)
Water Minimum 6.1 1.8 3.0 3.3 1.2
Consumption
(gallons) Maximum 7.3 5.8 4.7 3.3 1.2
Water Minimum 23.2 6.9 11.5 12.5 4.7
Consumption
(liters) Maximum 27.8 21.9 17.7 12.5 4.7
Wash Temp. 150 -160 ° F 122 -130 ° F 113 -122 ° 113 ° Incoming
Rinse Temp. 156°F 113 -156°F 156°F 122-140° F Incoming
THE NSF SYMBOL
A dishwasher or a dishwasher cycle that has the NSF symbol has been certified by the NSF International to meet very strict
requirements of wash time and water temperature to ensure dishware and kitchenware sanitization. These requirements
are explained in the document NSF/ANS1184, Residential Dishwashers. More information on NSF Certification is available
at the NSF website, http://www.nsfconsumer.org/home/appliances.asp.
Your dishwasher is NSF certified. The dishwasher cycles that are NSF certified are shown in the chart above. When these
cycles are complete, the "Sanitized" indicator on your dishwasher control panel will illuminate. However, if your household
water supply is to hot your dishwasher's heating time may be reduced, and the Sanitized message may not show.
16