Maytag W10097007A-SP Use & Care Manual page 10

r
Vacation, storage, and moving care
Non-Use or Storage Care
Operate your dryer only when you are at home. If you wi[[ be
on vacation or not using your dryer for an extended period of
time, you should:
1. Unplug dryer or disconnect power.
2. (For gas dryers only): Close shut-off valve to gas supply
line.
3. Clean lint screen. See "Cleaning the Lint Screen."
Moving Care
For power
supply
cord-connected
dryers:
1. Unplug the power supply cord.
2. Make sure leveling legs are secure in dryer base.
3. Use tape to secure dryer door.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
For direct-wired dryers:
1. Turn off power at fuse or breaker box.
2. Disconnect wiring.
3. Make sure leveling legs are secure in dryer base.
4. Use tape to secure dryer door.
For gas dryers:
1. Unplug or disconnect power to dryer.
2. Close shut-off valve in gas supply line.
3. Disconnect gas supply line pipe and remove fittings
attached to dryer pipe.
4. Cap the open fuel supply line.
5. Make sure leveling legs are secure in dryer base.
6. Use tape to secure dryer door.
Reinstalling the Dryer
Follow the "installation instructions" to locate, [eve[, and
connect the dryer.
the drum light
(on some models)
1. Unplug dryer or disconnect power.
2. Open the dryer door. Locate the light buJb cover on the
back waJJof the dryer. Using a PhiJJips-head screwdriver,
remove the screw [ocated in the lower right-hand corner
of the coven Remove the coven
3. Turn bulb counterclockwise. Replace the bulb with
a 1 0-watt appliance bulb only. Replace the cover and
secure with the screw.
4. Plug into a grounded outlet or reconnect power.
10