GE JGBP29 Owner's Manual And Installation Instructions page 204

Self-cleaning gas ranges
Table of Contents

Advertisement

Before you call for service...
Troubleshooting Tips
Possible Causes
What To Do
D_
gOesblank
_ A fuse in your home may be
• Replacethe fuse or reset the circuit breaker.
fan
somemodels)
blown or the circuit breaker
tripped.
The clock is turned off so that it
• See the Using the clock and timer section.
does not show in the display.
Display flashes
Power failure.
° Resetthe clock.
i'onsomemodels.,
Unable to get the
Oven control pods were
° The Bake and Broil Hi/Lo pods must be touched at
display to show "SF"
not touched properly,
the same time and held for 3 seconds.
_'on somemodels.,
Power outage,
Power outage or surge.
° Resetthe clock. If the oven was in use,you must reset
clock flashes
it by touching the Clear/Off pad, setting the clock and
_'on somemodels.,
resetting any cooking function.
"Burning" or "oily"odor
This is normal in a new oven
° To speed the process, set a self-clean cycle for a
emitting from the vent
and will disappear in time.
minimum of 3 hours. See the Using the self-cleaning
oven section.
Strong odor
An odor from the insulation
° This is temporary.
around the inside of the oven
is normal for the first few times
the oven is used.
Fan noise
A cooling fan may automatically
• This is normal. The cooling fan will turn off and on.
turn on and off to cool
internal parts.
Drawer does not sfide
The drawer is out of alignment.
° Fullyextend the drawer and push it all the way in. smoothlyor
drags
See the Care and cleaning of the range section.
Drawer is overloaded or load
• Reduceweight. Redistribute drawer contents.
is unbalanced.
48

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents