Others Menu - Sony PMW-50 Operating Instructions Manual

TC/UB SET
Menu items Subitems and setting values Contents
TC Format
Setting the time
code format
Video formats
59.94i
59.94P
29.97P
23.98P
50i
50P
25P

OTHERS Menu

OTHERS
Menu items Subitems and setting values Contents
All Reset
Resetting to the
factory status
Setup Data Store(SxS)/(USB)
Storing/recalling
the menu settings
on SxS memory
cards or USB flash
drive
Recall(SxS)/(USB)
Time Zone
Setting the time
difference
46 Setup Menu List
DF / NDF
Frame TC Format
setting
00 to 29 DF/NDF
switchable
(Fixed to DF in
Clock mode)
1) 2)
00 to 23 Fixed to NDF
00 to 24 Fixed to NDF
Execute/Cancel
Execute/Cancel
Execute/Cancel
UTC –12:00 to +13:30
Set the timecode format.
DF: Drop frame
NDF: Non drop frame
Note
The current video format/frame frequency determines
whether the mode is fixed either to DF or NDF (see below),
regardless of the TC Format setting.
1)
The frame digits in "Setting" is limited to 00, 04, 08, 12, 16,
and 20.
The frame at the beginning of recording is limited to 00, 04,
08, 12, 16, or 20.
As "23.98P Output" (page 43) in the VIDEO SET menu
becomes 2-3 pull-down 59.94i when recording (or standing
by to record) HQ 1920/23.98P other than when "23.98PsF"
is selected, the overlapping timecodes of frames output
from the SDI OUT connector are renumbered from 00 to
29.
2)
Even in Clock mode, the timecode is gradually shifted,
because it is counted by NDF.
As output from the SDI OUT connector becomes 2-3
pulled-down video when recording (or standing by to
record) HQ 1920/23.98P and other than "23.98PsF" is
selected for "23.98P Output" (page 43) in the VIDEO SET
menu, fields are created in which overlapping timecodes
are displayed on the screen.
Select "Execute" to reset the recorder to the factory status.
When you select "Execute" to store the setting values, the
setup file is stored to one of the following directories.
For UDF: /General/Sony/PRO/CAMERA/XDCAM/
PMW_50/
For FAT: /SONY/PRO/CAMERA/XDCAM_EX/PMW_50/
Select "Execute" to retrieve the setting values from an SxS
memory card.
Set the time-zone difference from UTC in steps of 30
minutes.
Note
The default setting is different among the sales areas.
United States and Canada: –5:00
Europe area: 0:00
Oceania: +10:00