Tc/Ub Set Menu - Sony PMW-50 Operating Instructions Manual

TC/UB SET Menu

TC/UB SET
Menu items Subitems and setting values Contents
Timecode Mode
Preset / Regen / Ext Regen /
Setting the
Clock
timecode
Run
Rec Run / Free Run
Setting
Reset
Execute / Cancel
Users Bit Mode
Fix / Date
Setting the user
bits
Setting
Set the timecode mode.
Preset: To start the timecode from the specified value
Regen (regeneration): To continue the timecode during
recording only. When you insert another SxS memory
card, the recorder starts next recording so that the timecode
continues from the last recorded timecode on the card.
ExtRegen (external regeneration): To synchronize to the
timecode superimposed on the internal input signal.
Clock: To use the current clock time as the timecode
Set the running mode when the timecode mode is set to
"Preset."
Rec Run: To advance the timecode during recording only. The
continuity of the timecode is maintained between clips in
the sequence of recording as long as the SxS memory card
is not changed. If you remove the memory card and record
on another card, the timecode will not continue when you
return the first card to the slot again.
Free Run: The timecode keeps advancing regardless of the
state of recording to the SxS memory card. Always select
"Free Run" when "Mode" is set to "ExtRegen."
Set the timecode to a desired value.
Select "Execute" to reset the timecode to 00:00:00:00.
Set the user bit mode.
Fix: To use a desired fixed value as the user bits
Date: To use the current date
Set the user bits to a desired value.
Setup Menu List 45