Canon PIXMA MX320 Manual page 682

Changing the Machine Settings on the LCD
> Changing the Machine Settings
Advanced Guide
Settings on the LCD
Changing the Machine Settings on the LCD
This section describes the procedure to change the settings in the Device settings screen, taking the
steps to specify Extended copy amt. as an example.
Note
The * (asterisk) on the LCD indicates the current setting.
1.
Make sure that the machine is turned on.
2.
Press the Menu button repeatedly until Device settings appears.
When you change the fax settings, press the Menu button repeatedly until Fax settings appears in
the copy mode or the fax mode.
3.
Use the button to select Print settings, then press the
4.
Use the button to select Extended copy amt., then press the OK button.
5.
Use the button to select a setting item, then press the
Fax settings
Print settings
Advanced settings
Mobile phone settings
Bluetooth settings
PictBridge settings
Reset setting
> Changing the Machine Settings on the LCD
Page 682 of 817 pages
> Changing the Machine
button.
OK
button.
OK
Page top