Cleaning The Print Head Deeply - Canon PIXMA MX320 Manual

Cleaning the Print Head Deeply

> Routine Maintenance
Contents
Deeply
Cleaning the Print Head Deeply
If print quality does not improve by the standard cleaning of the Print Head, clean the Print Head deeply.
Cleaning the Print Head deeply consumes more ink than the standard cleaning of the Print Head, so
clean the Print Head deeply only when necessary.
1.
Make sure that the power is turned on.
Operation Panel .
See
2.
Clean the Print Head deeply.
Press the Menu button repeatedly until Maintenance appears.
(1)
Use the
(2) (-) or
The machine starts cleaning the Print Head deeply.
Do not perform any other operations until the machine completes the deep cleaning of the Print Head. This
takes about 1 minute 30 seconds.
3.
Check the print head condition.
Printing the Nozzle Check Pattern
See
If the problem is not resolved, turn off the power and clean the Print Head deeply again after 24 hours. Do not
disconnect the power plug when turning off the power.
If the problem is still not resolved, replace the FINE Cartridge with a new one. See
If the problem is still not resolved, contact your service center.
>
When Printing Becomes Faint or Colors Are Incorrect
(+) button to select Deep cleaning, and press the
.
Advanced Guide Troubleshooting
> Cleaning the Print Head
button.
OK
Replacing a FINE Cartridge
Page top
Page 107 of 817 pages
.