Using An Svrm-100A Remote Control Unit (Not Supplied); Location And Function Of Parts; Marking Indexes; Searching For A Particular Image - Index Scanning - Sony DVO-1000MD Instructions For Use Manual

Using an SVRM-100A
Remote Control Unit
(Not Supplied)
An SVRM-100A connected to the REMOTE 1
connector on the front panel allows you to control the
unit remotely. You can mark indexes and search for the
desired indexes using the jog/shuttle dial.
This section describes the location and function of parts
and search operations that you can carry out using the
SVRM-100A.

Location and Function of Parts

This section describes the functions used for operating
the unit. The buttons on the SVRM-100A corresponding
to ones on the unit have the same function.
1 FREEZE button
2 INDEX button
3 MARK button
4 ERASE button
1 FREEZE button
Outputs the FREEZE command.
2 INDEX button
Outputs the INDEX command.
When you press this button once, the unit enters in
the index scan mode. When you press this button
twice, the unit enters in the index search mode.
3 MARK button
Outputs the MARK command.
4 ERASE button
Outputs the ERASE command.
5 STOP button
Outputs the STOP command.
5 STOP button
6 REC button
7 PAUSE button
8 F FWD button
9 PLAY button
0 REW button
qaJOG/SHUTTLE button
qsJOG/SHUTTLE dial
6 REC button
Outputs the REC command.
7 PAUSE button
Outputs the PAUSE command.
When the unit receives this command during
playback, it pauses playback.
When the unit receives this command during
recording, it pauses recording.
8 F FWD button
Has the same function as the >NEXT/DOWN
button of the unit.
9 PLAY button
Outputs the PLAY command.
0 REW button
Has the same function as the .PREV/UP button
of the unit.
qa JOG/SHUTTLE button
To play back in jog/shuttle mode using the jog/
shuttle dial, press this button. The indicator lights
up.
qs JOG/SHUTTLE dial
The playback direction and speed are determined
according to the position of the shuttle dial, and the
search command is output.
The jog dial becomes effective when the shuttle dial
is set to the STILL position.
The playback speed and direction are determined
according to the direction in which the dial is turned
and the speed, and the search command is output.

Marking Indexes

You can mark indexes at the desired point during
recording and playback.
1
Set the unit in the recording or playback mode.
2
Press the MARK button at the instant when the
image to which the index is to be put is displayed.
You can mark up to 99 indexes in one title and up to
254 indexes on one disc.
Searching for a Particular Image -
Index Scanning
1
Load a disc on which indexes are recorded.
2
Set the unit in stop mode or playback mode.

Using an SVRM-100A Remote Control Unit (Not Supplied)

65