Advertisement
sPeCIFICatIONs
XCD-MV6
Camera
Image sensor
1/3-type progressive scan CMOS
Standard output pixels
640H x 480V (752H x 480V Max.)
Standard frame rate
60 fps
Cell size (H x V)
6.0 x 6.0 µm
Minimum illumination
0.5 lx (F1.4, +18 dB, Shutter:1/60s)
Sensitivity
400 lx at F5.6 (0 dB)
Gain
Manual (0 dB to +18 dB)
Shutter speed
1 sec to 1/50,000 sec (Operable)
Camera Features
Video output resolution depth
Mono 8: 8 bits/pixel
Mono 16: 10 bits/pixel
Readout modes
Partial scan, 2 pixels mixture
Readout features
Gamma (Variable),
Defect pixel correction,
FPN correction,
Shading correction
Synchronization
Trigger start (Mode 0),
Trigger start and exposure duration (Mode 1),
Programmable trigger (via the IEEE1394 bus),
Trigger inhibit setting,
Trigger delay setting/Strobe controll
Memory channel
15 channels for parameter settings
Image buffer
100 frames (Max.)
Interfaces
Video output
IEEE1394b-2002, beta (screw lock possible)
Transfer rate (IEEE1394)
1600/800/400 Mbps
Digital I/Os
IN (2x, TTL), OUT (2, TTL)
General
Lens mount
C mount
Power requirements
DC 8 V to 30 V (via IEEE1394b 9-pin cable or
8-pin camera cable)
Power consumption
2.2 W (Typ.)
Operating temperature
23°F to 113°F (-5°C to +45°C)
Storage temperature
-22°F to +140°F (-30°C to +60°C)
Operating humidity
20% to 80% (no condensation)
Storage humidity
20% to 95% (no condensation)
Vibration resistance
10 G (20 Hz to 200 Hz)
Shock registance
70 G
Dimensions (W x H x D)
1-3/16 x 1-3/16 x 3/4 inches (29 x 29 x 19 mm)
(not including protruding parts)
Weight
1.3 oz (37 g)
Regulations
UL60950-1+CSA C22.2 No.60950.1,
FCC/ICES-003: Class A, CE: EN61326,
AS/NZ: EN55022, VCCI: Class A
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
sony.com/videocameras
IS-1233 (MK10772V1)
PIN assIGNMeNt
8-pin connector
Pin No.
1
Trigger IN
2
Strobe OUT
3
GPIO OUT 1
4
GPIO IN 2
5
GPIO IN 1
6
DC IN (Ground)
7
DC IN
8
GPIO OUT 2
DIMeNsIONs
9/16 (14)
1 1/4 (31)
1/2 (12)
1 3/16 (29)
19/32 (14.7) 17/32 (13)
3-M3 DEPTH3
©2010 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features and specifications are subject to change without notice.
The values for weight and dimension are approximate.
"SONY" and "make.believe" are registered trademarks of Sony Corporation.
All other trademarks are the property of their respective owners.
2-M2 DEPTH3
3/8 (8.9)
3/4 (19)
7/32 (4.9)
2-M3 DEPTH5
Unit: inches (mm)
Printed in USA (12/10)
Advertisement
