Mode Setting By Dip Switch - Sony XC505 Technical Manual

Pin Assignment of the DC IN/SYNC/
VIDEO Connector
1 9
2 8
10
3
11 12
4 6
5
Signal
External Sync signal
Rin No. HD, VD
1 GND
2 +12 V
3 VBS/Y Output
(GND)
4 VBS/Y Output
(signal)
5 HD Input (GND)
6 HD Input
(signal)
7 VD Input
(signal)
8 GND (–/C)
9 –/C Output
(signal)
10
11
12 VD Input (GND) VD Input (GND)
8

Mode Setting by Dip Switch

7
Sync signal types
Internal Sync
signal
VS/VBS Input
GND GND
+12 V +12 V
VBS/Y Output VBS/Y Output
(GND) (GND)
VBS/Y Output VBS/Y Output
(signal) (signal)
– –
– –
VS/VBS Input –
(signal)
GND (–/C) GND (–/C)
–/C Output –/C Output
(signal) (signal)
RS-232C (TXD)
RS-232C (RXD)
GND
RS-232C (GND)
Mode Setting by Dip
Switch
By flipping the DIP switches located on the side of this
camera, you can adjust the following functions.
Note
Each switch is assigned to a function. The switches that
should be set to adjust a certain function (white balance,
shutter speed), to switch the AGC (ON/OFF), or to switch
the output signals (Y/C/VBS) are specified and indicated
by shading in the illustrations of the corresponding
descriptions of the function. The switches that are not
shaded are not related to these functions.
Factory Settings
White balance: ATW
Shutter speed: OFF
AGC: ON
Output signal (Y/C/VBS): VBS