Sony PMW-400K Operating Instructions Manual page 114

OPERATION
Menu items
Marker
Makes settings related
to marker display in the
viewfinder screen.
114 Menu List
Sub-item Settings
Safety Zone On/Off
Safety Area 80%/90%/92.5%/95%
Aspect Marker Line/Mask/Off
Aspect Select 15:9/14:9/13:9/4:3/
1.66:1/1.85:1/2.35:1/
2.4:1
Aspect Mask 0% to 30% to 90% (10%
step)
User Box On/Off
User Box Width 40 to 500 to 999
User Box Height 70 to 500 to 999
User Box H Position –479 to 0 to 479
User Box V Position –464 to 0 to 464
Guide Frame On/Off
Description
Turns the safety zone display on or
off.
Note
When "Center Marker," "User Box,"
and "Guide Frame" are set to "On,"
this setting cannot be turned on.
Selects the safety zone range.
When an aspect marker is to be
displayed, selects the display
method. Select "Off" if you do not
want to display the marker.
Line: Show as white lines.
Mask: Display by lowering the
video signal level of areas
outside the marker range.
Selects the aspect ratio of the
marker.
When "Aspect Marker" is set to
"Mask," specifies the video signal
level of areas outside the marker
range as a percentage value relative
to the video signal level of areas
inside the marker range.
Turns the box cursor display on or
off.
Note
When "Center Marker," "Safety
Zone," and "Guide Frame" are set to
"On," this setting cannot be turned
on.
Specifies the box cursor width
(distance from the center to the left
and right edges).
Specifies the box cursor height
(distance from the center to the top
and bottom edges).
Specifies the horizontal position of
the box cursor center.
Specifies the vertical position of the
box cursor center.
Turns display of the guide frame on
or off.
Note
When "Center Marker," "Safety
Zone," and "User Box" are set to
"On", this setting cannot be turned
on.