Sony F35 Brochure & Specs page 14

A Wide Variety of System Components
(for F35/F23)
MSU-900/950 Master Setup Unit
The MSU-900/950 Master Setup Unit is a central control panel
used for the adjustment of camera parameters in a
multi-camera system. Equipped with a 6.5-inch* type LCD
display, the MSU-900/950 allows clear viewing of adjustment
parameters during operation. A built-in Ethernet interface
(10BASE-T/100BASE-TX) enables the MSU-900/950 to be
connected to the F35 and F23 cameras either directly or via
a network hub. Equipped with a Memory Stick media slot,
setup parameters can be stored and transferred between
cameras using Memory Stick media.
Viewable area measured diagonally
*
MSU-950
MSU-900
RM-B750 Remote Control Unit / ARRI Wireless
Remote Control Unit WRC-2
The RM-B750 Remote Control Unit establishes a highly
mobile and fully controllable camera system in the field by
integrating control capabilities equivalent to those of the
MSU-900/950 Master Setup Unit. The combination of an LCD
touch-panel screen and direct push buttons enables users
to adjust and control camera parameters. When
necessary, basic tape transport of the connected SRW-1
can be controlled from the RM-B750. For further operational
convenience, the RM-B750 has a Memory Stick media card
RM-B750
slot that enables various setup parameters to be stored and
transferred between cameras.
In addition, the industry-standard ARRI Wireless Remote
Control Unit WRC-2 and Universal Motor Controller UMC-3
can also be utilized to control the F35 and F23.
By using the WRC-2, the status of the camera can be
displayed and the frame rate can be adjusted during
recording, just like a conventional film camera. This is done
in the same way as you would do on the camera itself.
To keep the correct exposure of the captured image, the F35
and F23 are equipped with two compensation modes: Angle
compensation mode and Gain compensation mode.
When a change in the frame rate is detected, whichever
compensation mode is activated at the time works
automatically to retain the video level.
Angle compensation mode automatically corrects the
shutter angle to retain the video level.
Gain compensation mode automatically corrects the gain
to retain the video level, while maintaining the existing
shutter angle setting.
ARRI Wireless Remote Control Unit WRC-2
14