Basic Operation Flow; Creating Gamma Data; Installing The Gamma Data In A Camera - Sony F35 User Manual

Basic Operation Flow

The flow of gamma creation is roughly indicated below.

Creating gamma data

There are three methods for creating gamma data.
1. Newly creating gamma data (using Parameter
Edit mode)
Select "New Gamma Data" from the Data menu to create
new gamma data. Parameter Edit mode is selected to
permit you to enter the characteristics required for
gamma.
For details, see "To start editing in Parameter Edit mode"
(page 14).
2. Loading library data and edit them in Custom
Edit mode
You can select fundamental characteristics, such as ITU-
R709, Hyper Gamma, or S-LOG, from the library and
finely adjust them in Custom Edit mode.
To load the library data, select "Library" from the Data
menu then start editing.
For details, see "To import library data" (page 10) and
"To switch to Custom Edit mode" (page 18).
3. Importing data of different systems
When you wish to install data created with another
grading tool, use the import function.
Select "Import File" from the Data menu.
For details, see "Importing and Exporting Files of Other
Types" (page 23).
Installing the gamma data in a
camera
The data can be installed in the camera via a Memory
Stick or Ethernet.
1. Via a Memory Stick
Gamma data (five sets at maximum) are installed as a user
gamma file. The user gamma data in the camera are
overwritten.
To write data to a Memory Stick, select "Export Memory
Stick" from the User Gamma menu.
For details, see "To install user gamma via a Memory
Stick into a camera" (page 12).
8
Basic Operation Flow
2. Via Ethernet
This is valid only for an F23/F35 having Ethernet control
capability. You can directly transmit data being edited to
the camera.
For details, see "To transmit the data to the connected
camera" (page 22).