To Start Editing In Parameter Edit Mode - Sony F35 User Manual

Icon/ Designation Function
indication
Auto add
points
Move curve
holistically
switch to Switching
custom Edit modes
edit
or
switch to
parameter
edit
c Window mode indication
Indication Mode description
Graph View View mode for confirming the
characteristics or information on
gamma data without editing
Parameter Edit Parameter Edit mode for editing
gamma data by specifying several
parameters (function added to
CvpFileEditor V4.0 and later)
Custom Edit Custom Edit mode for editing gamma
data by setting three points on the
graph and moving the center point
(function available since CvpFileEditor
V3.0 and earlier)
d Gamma Data Information area
The gamma data name, the user file to which the gamma
data belongs, comment 1, and comment 2 are displayed.
Entering/editing of comment 1 and comment 2 is enabled
when you double-click on the respective text boxes in an
edit mode.
14
Functions and Operations of the Component Windows
Valid in Custom Edit mode,
where three adjustment
points are normally specified,
using the mouse.
Clicking on this icon after
specifying the following
values automatically adds
three edit points on the
graph.
Input Value [%]: Enter the
value for the center point to
be edited on the graph (in
%).
Width [%]: Enter the value of
the width between two
points to be edited (in %).
To holistically move the curve
in vertical directions in
Custom Edit mode. If you
enter a value (%) in the text
box, the curve moves as far
as specified.
switch to custom edit: To
select Custom Edit mode
for editing with three points
you specified with the Allow
tool.
switch to parameter edit: To
select Parameter Edit
mode for editing gamma
data with parameters.
Note
Once data are edited in
Custom Edit mode, the data
can no longer edited in
Parameter Edit mode.
e Graph Information area
The characteristics of gamma data are displayed in Graph
View mode. In edit modes, operations are different
between Parameter Edit mode and Custom Edit mode.

To start editing in Parameter Edit mode

Parameter Edit mode permits you to easily create a
gamma curve by specifying some values (parameters)
that determine the gamma.
Parameter editing can be started with either of the
following two methods:
1. Newly creating gamma data
Select "New Gamma Data" from the Data menu to open
the New User Gamma dialog box.
Specify Name for the gamma and press the Enter key (or
click on OK) to start editing in Parameter Edit mode.
2. Double-clicking on the gamma data on the list
whose Base is "Param"
Parameter editing is enabled for a curve for which
Parameter editing once has been done as long as the curve
has not been edited thereafter in Custom Edit mode.
The gamma data whose Base column of the list shows
"Param" can be edited in Parameter Edit mode. Double-
click on the gamma data on the list to start editing in
Parameter Edit mode.
"Param" indication
Base column Base column